How to Build a Garden Gates that last for 50 years

Garden Gates, Driveway Gates, Wood Fences, Garden Arbors, Porch swings by Prowell Woodworks Garden Gate Products Gate Hardware Contact Prowell Woodworks About Charles Prowell Woodworks Payment Gateway Site Map

 


Specifications for Exterior Woodworking Joint #10


 

 

#10
Floating Tenon w/ Dowel Locking Pins
 

Joint #10 utilizes a locking key somwhat simpler than the tenon keys of Joint #9. By increasing the tenon size itself to 1" thickness, we can bore a 3/8" diameter hole through the top of the stile and rail, on through the width of the tenon, and into the stock. A joint we'll turn to on large gates of 2-1/4" thickness extending in the 5'-6' width range.

Click Here, or on the sketch for hi-res PDF.

 
Joinery #10
 

 

 

Woodworking joinery for wood gates, from prowell

 

 
Using a layout template, the bores for the dowel keys are easily managed. The purpose of the template is simply to insure the bores are straight, centered through the thickness of the tenon.
 
Joinery #10
 
Joint #9 for building a wood gate
 

The pins must extend all the way through the tenons and into the stock for the full strength of this joint.

Although the locking key tenons of joint #9 extend only partially into the tenon, #9 joint also employs a full thru tenon with wedges for the added support.

 
Joinery #10
 
Prowell's Joinery #9 for wood garden gates
 
The pins must be of an appropriate species and with sufficient density, such as oak or teak. Common maple or birch dowels are not resistent to moisture and will decay in the more humid climates.
 
Joinery #10
 
woodworking joinery #9 by Prowell
 
The 1"-thick tenon is eased with a roundvoer bit to correspond the radius of the mortise.
 
Joinery #10
 
creating the joinery for a wood gate
 

Sanded flush. The pins are essentially hidden from view, located on the bottom of the gates and the top, which is commonly at a height beyond the normal sightline.

 
Joinery #10
 
build a wood gate with tenons and locking keys
 

Ben with an example where we utilized Joint #10. Our gate style #77-A

 
Joinery #10
 

 

>>>To PROWELL HOME PAGE
 





SHIPPING TO ALL 50 STATES
©1995-Present Charles and Ben Prowell.
This Web Site was launched in the Spring of 1995.


1 . 7 0 7 . 8 6 1 . 3 4 0 9 (FAX)



 

 

 

Privacy  

Unless otherwise noted, products appearing on this site are the sole design rights of Charles & Ben Prowell.