Garden Gates, Driveway Gates, Wood Fences, Garden Arbors, Porch swings by Prowell Woodworks Garden Gate Products Gate Hardware Contact Prowell Woodworks About Charles Prowell Woodworks Payment Gateway Site Map

prowell woodworks for garden gates
 

 

Prowell"s Custom Wood Fence Panel #16

Available to a maximum width of 84" x 60" net height

>>How to Order

 
WOOD FENCE PANEL #16
This Fence is Base Price (w/o Pattern Blocks)
Base Price +9% (w/Pattern Blocks)
Follow the link to the Base Price Table

 

 

Fence Style #16 flanking panels with Gate Style #32

** Not to exceed 60" ht. unless Pattern Blocks are introduced.

 
#16
 
custom wood fence Panel #16

 

     
#16
   

 


Dallas, TX

Open Picket Garden Fence and Gate in Dallas, TX.

The neighborly Fence Design #16 makes a suitable enclosure for a small existing patio.

Fence style #16 is limited to Limited to 60" height. With the uniform spacing between pickets, any variation from a bowed or cupped picket is readily noticeable. For heights beyond 60", see #16-1 below.

Shown with Garden Gate Style #32

 
Custom Wood Fence Panels #16 by Prowell Woodworks
#16
   
   


 


Dallas, TX

Any of the fence designs that provide solid panels would, in this application, have reduced the existing patio enclosure with a much greater sense of diminished space.

Two narrow 10" flanking Wood Fence Panels serve to offset the gate from the almost identical panels.

  custom wood  fence Panels in Texas
#16
   
     

 


Dallas, TX

Now and again we're sent a 'before' photo.

What the homeowner's are accomplishing is a semi-private courtyard no longer openly exposed to the sidewalk and street.

The courtyard Wood Fence Panels #16 allows light penetration, as well as visibility.

  custom wood fence Panel in Texas
     

 

    WOOD FENCE PANEL #16-5
      Base Price + 9% (with Pattern Blocks)
 
 


Mill Valley, CA

Fence Style #16-5. Every picket is supported by a coorespnding Pattern Block.

 
#16-5
 
 


Mill Valley, CA

Fence Style #16-5 shown with Garden Gate style #32.

 
#16-5
 
 


Mill Valley, CA

Along the front entrance, as viewed from within the property.
Accompanied by a sliding Driveway Gate #4

 
#16-5
 
 


Mill Valley, CA

Always nice to glimpse a 'before' photo.

 
#16-5
 


    WOOD FENCE PANELS #16-1
      Base Price + 9% (with Pattern Blocks)
 
 


Berkeley, CA

Here we illustrate Wood Fence Panel #16-1 with the Pattern Blocks. Although we require these for any fence height over 60" simply to insure the stability of the vertical pickets and prevent them from possibly bowing over the years, we have elected to use them here on a Fence height of only 42".

Shown with Gate Design #57-1

 
#16-1
 
custom wood fence Panels #16 in Berkeley, CA
 


Although the pattern layouts are almost infinite, the structural integrity requires that each and every picket is connected to its adjacent picket.

 
#16-1
 
Custom wood fence Panels in the San Francisco Bay Area

 

    WOOD FENCE PANEL #16-2
      Base Price + 9% (with Pattern Blocks)
 
 


Sonoma County, CA

Shown with Gate styles #32 modified with a straight top rail.
Gate is Base Cost

 
#16-2
 
Custom Wood Fence Panels #16-2 in Sonoma County

 

    WOOD FENCE PANEL #16-3
      Base Price +9% (with Pattern Blocks)
 
 


Palo Alto, CA

As a single flanking Fence Panel to Gate style #32 in Palo Alto, CA

 
#16-3
 
custom wood  fence Panels in Silicone Valley, California
 


 
#16-3
 
Custom wood  fence Panels in California


    WOOD FENCE PANEL #16-4
      Base Price + 16% ((Maximum of two joints per panels )
 
 


Sonoma County, CA

Wood Fence Panels #16-4 is distinguished by a need for semi-radius fence-lines. Instead of actually creating a laminated bent horizontal rail, the panels are instead joined at junctures between the posts with a maximum of two joints per panel. This, in conjunction with the setting of the site fence posts, can simulate a radius layout by means of joinery rather than laminations

 
#16-4
 
custom wood fence Panel #16-3 in san francisco bay area
 


--Sonoma County, California--

Here we see a series of fairly narrow panels with a single radius joint per panel. The width per panel is determined by the tightness of the site radius.

 
#16-4
 
Custom Wood Fence Panels  in Sonoma County, CA

 

 
Custom Wood Fence Panels with Open Pickets and/or Open Grids
Wood Fence #2
custom wood fence Panels #2
 
Wood Fence #2A
custom wood fence Panels #2A


 
Wood Fence #4
custom wood fence Panels #4
 
Wood Fence #6
custom wood fence Panels #6
 
Wood Fence #14
custom wood fence Panels #14
                 
Wood Fence #16
custom wood fence Panels #16
 
Wood Fence #19
custom wood fence Panels #19
 
Wood Fence #21
custom wood fence Panels #21
 
Wood Fence #22
custom wood fence Panels #22
 
Wood Fence #24
custom wood fence Panels #24
                 
Wood Fence #27
custom wood fence Panels #27
 
           

 

>>>To GALLERY 3
Garden Fence
The Designs of Prowell Woodworks are protected by Patents and Patents Pending.




SHIPPING TO ALL 50 STATES
©1995-Present Charles and Ben Prowell.
This Web Site was launched in the Spring of 1995.


1 . 7 0 7 . 8 6 1 . 3 4 0 9 (FAX)



 

 

 

Privacy  

Unless otherwise noted, products appearing on this site are the sole design rights of Charles & Ben Prowell.

 

#16 ------0547-Herze
#16-1 ----0741-Winsberg
#16-2---- 0234-Voge
Cropped image: 0690-Cohen