WOOD DECK RAILING 21-b

Deck Railing 21-b is Base Cost + 18%
(Based on 36-42″ ht)
> Go to Base Price Table

Our garden railing 21-b is similar to #21 but as continuous repeating grids of approximately 5″ sq. The grid openings can be reduced to UBC (Uniform Building Code) 4″ if your porch or deck is more than 24″ off the grade.

*Note: This particular example shows remainder grids along the top row of each railing panel, as well as the two sides. The top row, as you’ll see below, is laid out to align with the top horizontal grid of a corresponding gate. Because of this ‘fixed’ layout, the remainder grids on the left and right are left to chance. Confused?

Cincinnati, Ohio.

Our wood railing as a separator between the driveway and the inner garden. Serving the same function as our Pony Panels, but with a height beyond the 24″ maximum offered as a Pony Panel.
More on Pony Panels, Click Here

The wood railing panels at 36″ net height set to a stone wall. The grid layout was aligned to the one horizontal of the gate grid. The posts were set with threaded rod. The gate jambs are embedded to the gate columns and mounted onto the column block core, with the stone set to either side of the jambs. The jambs extend 3/4″ beyond the stone.

Gate style #20

An incumbent risk with living in Cincinnati . . . separated from the roaming bands of Kentucky renegades by the width of a single river. This thin geological ribbon as the cultural distinction between the merrymaking survivalists and the manicured landscapes of a Presbyterian stronghold. And of course the confusion, the awkward clash of repeated encounters.

Cincinnati, Ohio

Standard 1″ clearance between the outdoor wood railings and the top of the wall.

Cincinnati, Ohio

Cincinnati, Ohio

A look at the residence and grounds. The Garden Gate and Deck Railing 21-b on the right connecting the house and garage.