WOOD PRIVACY DRIVE GATES 25

Driveway Gates 25 are Base Price + 32%
> Go to Base Price Table

Driveway security gates 25 are priced at +32% because of the sheer girth of lumber involved. It features upper and lower wood pickets held to only 1/2″ spacing. Both upper and lower picket thicknesses at 1-¼” thickness. Per square foot the heaviest gate we offer. *Requires steel frames for anything over 48″ width.

At 1/2″ spacing, the gap between the pickets is exposed only if your are standing head on. A few degrees to either side and the exposure is blocked by the edge of the adjacent picket. In this manner we can accomplish a privacy gate without resorting to the barrier of a solid panel gate.

Palo Alto, CA

Prowell’s privacy gates for driveways in Silicone Valley, CA, The posts were cut flush with the top of the gate and sealed with a liquid wax emulsion (AnchorSeal).

Palo Alto, CA

Showing how the two narrow flanking panels are created as solid fill, utilizing the full property-line but allowing the gates themselves to encompass only the brick paving.

Palo Alto, CA

The connecting, or flanking panels, with their solid inserts and full tenoned joinery, combining the strength and rigidity of duel posts.

Palo Alto, CA
There is a limit to just how wide we’ll go with this design. The limit being how many pickets can we assemble for the glue on the first pickets begins to set.

Palo Alto, CA

Our patron, seemingly pleased.

Bethesda, MD

Driveway security gates 25-1 within a car-park in the DC Beltway.

Bethesda, MD

Not the most bucolic background, while nevertheless managing to illustrate the low visibility of this driveway gate design. .