AUTOMATED WOOD DRIVEWAY GATES 27

Driveway GateS 27 are Base Price + 23%
> Go to Base Price Table

Sonoma County,CA

Bronze clavos, ornamental hinge-fronts, and diagonal reliefs combine for a slightly medieval aesthetic. 

Sonoma County, CA.

The driveway security gates 27 in Sonoma County, CA. Shown with Ben Prowell on site.

Sonoma County, CA.

The back, or property side of the driveway security wood gates 27, showing the motors and motor arms, and the in-progress walls prior to being clad with stone.

Prowell’s Drive Gates are built to the dimensions specified by the site. And although the vast majority of the gates are at 6′ or less in height, this example of #27 is 9′ high at the apex and a little over 8′ at the spring-points. Because of both the height and a width of 14′ overall, the gates require steel. Our patrons preferred Option #3 in the Price Tables, with a steel frame embedded invisibly within the 3′ thickness of each gate.

PROGRESS

A few in-progress photos at the shop. Below, clamping the joined diagonals to the mid-stiles and rails.

A pair of embedded steel frames are essentially four single gates. Each half is routed to accept half the thickness of the steel frame, shown below. The other half will eventually laminate onto this half for the full thickness of 3″.

Charles routing the ‘weep slots’ on the property side of the gates to allow a self-sustaining drainage.

Ben installing the bronze clavos (door studs), as well as the bronze decorative hinge-fronts onto the street face of the gates.