FFENCE EXTENSION PONY PANEL 4

Pony Panel 4 is Base Cost + 5%
> Go to Base Price Table
Maximum 24″ net ht x 72″ width

P​ony Panel #4 features full width top and bottom horizontal rails. Grids of approximately 4″ to 6″ square.
Panel dimensions shown: 24″ net height x 73-⅛” net width. Grids at 5.9″

Commonly associated with Gate Style #4

San Mateo, CA

While Pony Panels #4 and the accompanying Gate #4 with the Arbor #9 are striking, they fail to garner the neighbor’s attention, as one would have expected.

San Mateo, CA

From within the garden.
The stucco wall was built at 48″ht with the Prowell Pony Panels in mind.

It’s good, now and again, to see a ‘before’ photo. A successful, efficient makeover. Resulting in a small private inner garden and a defining aesthetic with the new stucco wall and Prowell’s involvement.

Typical posts. 3″ x 3″ x 24-1/2″ ht. Embedded with threaded rod for mounting to masonry or wood.

San Mateo, CA

The intention is to align the horizontal grid divider of the gate with those of the flanking Pony Panels #4.

W​ith a fixed panel dimensions of 72-1/2″ net idth and 23-1/2″ net hight, and matching the adjoining gate grid size of 4.67″, we see a top rail width of 1-3/4″ and a bottom rail width of 4-1/4″, enabling equal grids vertically and horizontally. Because we’re able to use a top rail of only 1-¾” width, we save the +5% listed for the above #4.

Illustrating again examples of a gate splitting two flanking Pony Panels, while maintaining the alignment of the horizontal grid dividers.
The grid size is determined by the net gate width.