CUSTOM WOOD ARBOR #23

Prowell’s custom wood Garden Arbor/Pergola #23 is a derivative of the popular Trellis Arbor #19. A similar drop-in overhead insert panel illustrating a little different grid pattern.

For all Arbors of lengths over 8′, the beam assemblies are shipped in components, pre-mortised and to be assembled on site. The beams in one box, the insert panels in another. On site, the open joints on the beams simply fit together, and the fully assembled insert panels drops in place.

Designed to draw off the side-wall, as shown, or as a free-standing assembly supported by site posts.

The below photos are finished with WoodRX ‘Chestnut”.
See: A Word About Finishes

Portland, Oregon

There are multiple site applications for Arbor Trellis #23.

1. Your contractor installs two beams mounted off the side-wall., supported by two posts. The beams mount to the side-wall with beam brackets (scroll down for this photo). The arbor pergola sits atop the beams. The posts and beams are wrapped with the Grid Wraps, as shown below. Your dimensioned drawings provided by Prowell will call out the specific dimensions of the post and beam placements.
2. The above application but without the post and beam grid-wrap panels. Because these are to be exposed, cedar posts and beams are preferred. The two outer arbor cross-beams are mounted directly to the side-wall with beam brackets, eliminating the need for the structural beams described above. The site contractor sets two posts as per the Prowell drawings. There are no post or beam Grid Wraps, as shown below.
3. By eliminating the post and beam grid-wrap panels, you can opt to mount the arbor cross-beams directly to the house and eliminate the two structural beams. The two outer arbor cross-beams are extended to the desired distance and are seated with appropriate bracket hardware.

** Optional application: If you prefer Arbor Pergola #23 as a stand-alone assembly such as #19, it requires four 6×6 site posts and two cross-beams set atop the posts. The optional Wrap Grids on the posts ad cross-beams provides lateral rigidity. If there are Prowell fence panels set between any two posts, the need for the Valance panels on that side becomes optional.

Complicated? Just write or call and explain more or less what you want as we’ll design the solution.

Portland, Oregon

Portland, Oregon

Portland, Oregon

The two primary support beams coming off the house are wrapped on both faces, as with the posts. The beam and posts were stained a darker color on site with a long-lasting solid-body Sansin product prior to the arrival of the trellis and wraps. The wraps are designed for quick removal to maintain the beam finish every 7-8 years or so.

Portland, Oregon

There is of course a pattern, a geometry, to the grids.

The grid wraps are backed so when mounted to the beam and posts, there is a 1/8″ clearance, disallowing the cavities without light and air flow that bacteria/fungus thrives on.

Portland, Oregon

The view from the livingroom window.

Portland, Oregon

COMPONENTS

The primary center Insert Panel. The center-point is a tighter grid, flanked by grids on either side featuring gloss black acrylic 1/2″ x 1/2″ square.

The centerpiece grid.

The wraps. The beam wrap on the left. The post wrap on the right.

PROGRESS

Francisco applying the WoodRX pre-finish. A 2-coat spray / back-brush application with a 7-8-yr lifeline.