CUSTOM WOOD FENCE PANEL 16

Wood Fence Panel 16 is Base Price + 6% and up (w/ Pattern Blocks)
Base Price (w/o Pattern Blocks)
> Go to Base Price Table
Available to a maximum width of 72″
Max Height without Pattern Blocks: 60″
Max Height with Pattern Blocks: 72″ +

CUSTOM WOOD FENCE PANELS 16-9

with full-width top rail
Mill Valley, CA

We open with wood fence 16-9, illustrating our amended layout for the Pattern Blocks. Basically, every picket is supported by at least one Pattern Block. No pickets have Pattern Blocks joined to both edges. .

Featuring the top and bottom horizontal rails at the same width.

Pattern Blocks: A solution to stabilize pickets from the potential bowing.

Wood open picket garden fence 16-9.

CUSTOM WOOD GARDEN FENCE 16-9

Mill Valley, CA

Wooden fencing 16-9 with the Wood Driveway Gates Style #4.
As a note: the drive gates are plumb and level, with the driveway itself on a sloping grade from right to left.

Automatic wood driveway gate 16-9b in Marin county, Ca.

WOOD PICKET FENCE 16-9

Mill Valley, CA

Custom permieter fence 16-9 from the street. A complicated layout, with uneven sloping grades and loose stone walls. All of it ironed out and resolved by Prowell’s highly regarded recommended installers.

Perimeter wood fence.

WOOD FENCE PANELS 16-9

Mill Valley, CA

A look at the ‘Before’ Photos sent in when first considering the project.

site layout for wood fence 16-9
site layout for fence 16-9. prowell

WOOD GARDEN FENCES 16-5

Standard top rail width but more complex Pattern Block layout
Mill Valley, CA

The wooden fence panels where every picket is supported by a corresponding Pattern Block. Although Pattern Blocks are available as an aesthetic for all heights, they are a required feature for heights over 60″. Without them and the pickets are vulnerable over the years and decades to the misbehavior of bowing.

The standard narrower top horizontal rail.

Wood open fence 16 with pattern blocks.

CUSTOM WOOD FENCE 16-5

Mill Valley, CA

Garden fence design 16-5 shown with Garden Gate style 32.

Left to a natural weathering. Although photographed here days after the installation, the cedar will age to a silvery gray in 2+ years. Premature weathering, or Pre-Weathered’ Finishes are available. See Finish Options by Clicking Here.

custom wood cedar fence panels 16 in Mill Valley, CA.

WOODEN FENCING 16-5

Mill Valley, CA

Along the front entrance, as viewed from within the property, the perimeter yard fence is evenly terraced, or stepped, to the sloping grade.
Accompanied by a sliding Driveway Gate #4

16.

CUSTOM WOOD FENCE PANELS 16-5

Mill Valley, CA

Always nice to glimpse a ‘before’ photo.

Before photo.

WOODEN FENCE PANELS 16-10

Brooklyn, New York
No Pattern Blocks

Amedly of multiple Prowell products with the Fence 16 shown here along with fence style #2o.
Because our homeowner is an architect, we naturally followed his lead and strayed from the standard design to incorporate a segmented upper section as a stand-alone panel–similar to our Pony Panels: Click Here.   Separated by 1-½”.

And, well . . . the Penguineers, gathered in anticipation of an early winter?

16-10 in Brooklyn, NY.

CUSTOM WOOD FENCE 16-10

Brooklyn, NY

Photograhed 2 years after installation–hence the maturing landscape.  Garden fences 16-10b in Brooklyn, NY.

CUSTOM WOODEN YARD FENCE 16-10

Brooklyn, NY

Showing how we go from a 60″ high fence-line to a 72″ high fence-line by employing Transition Panel style #5. Transition height to fence style 16-10 in Brooklyn, New York.

PERIMETER WOOD FENCE PANELS 16-1

Berkeley, CA
Narrower top rail width but more complex Pattern Block layout

Here we illustrate the Fence Panel 16-1 with the Pattern Blocks at a total height of only 42″. In this example, the Pattern Blocks are totally aesthetic and are not required to stabilize the pickets.

Shown with Gate Design #57-1

16 in Berkeley, CA.

WOOD FENCING 16-1

Although the pattern layout options are almost infinite, we would prefer, going forward, with patterns adhering to #16-9.

Picket fence in the San Francisco Bay Area.

CEDAR FENCE 16-6

Narrower top rail width but more complex Pattern Block layout
Healdsburg, CA (Sonoma County)

Custom wood  fencing 16-6 as a deck enclosure, along with Gate style #32. The top 2×6 cap is not included by Prowell.

Wood deck railing.

CUSTOM WOOD CEDAR FENCE 16-6

Healdsburg, CA (Sonoma County)

The gate itself is flanked by a pair of black wire grid panels that help to corroborate the open, airy aesthetic of the fence panels.

Pickets and pattern block wood fence in Sonoma County, CA.

WOODEN FENCE PANELS 16-3

Full width top rail width and the more complex Pattern Block layout
Palo Alto, CA

As a single flanking panel to gate style #32 in Palo Alto, CA .

Rocky Mountain gate latch E358

custom wood fence panels in Silicone Valley, California.

GATE FLANKING PANELS  16-3

Flanking panels in California.

WOOD PICKET FENCE 16-7

Alameda, CA

With the standard top rail width at 2-⅝” width and the more complex Pattern Blocks

Custom wood picket fence 16-7.

CUSTOM WOOD PICKET FENCE 16-7

Alameda, CA
An interesting application where the panels are mounted against the front face of the posts, instead of between them.
We would also more commonly see a gated access.

custom wood garden fence 16-7 in Alameda, CA.

WOOD FENCE 16-2

Standard top rail width.
Sonoma County, CA

Shown with Gate styles #32.
Total height of only 42″

16-2.

WOOD GARDEN FENCES 16-4

(Maximum of one joint per panels )
Sonoma County, CA

Wood Fence Panels 16-4 is distinguished by a need for semi-radius fence-lines. Instead of actually creating a laminated bent horizontal rail, the panels are instead joined at junctures between the posts with a maximum of two joints per panel. This, in conjunction with the setting of the site fence posts, can simulate a radius layout by means of joinery rather than laminations.

Joined panels have a maximum width of 36″ width.

custom wood fence Panel #16-3 in San Francisco bay area

CUSTOM WOOD FENCING 16-4

Sonoma County, California

Here we see a series of fairly narrow panels with a single radius joint per panel.

Fence panels in Sonoma County, CA.

FENCE 16 WITHOUT PATTERN BLOCKS
(Limited to 60″ maximum net ht)

CUSTOM WOODEN FENCES 16

No Pattern Blocks

The Wood Fence 16 (shown flanking Gate Style #32).

An example of a maximum height of 60″ and no Pattern Blocks.

Wooden fences near me.

CUSTOM WOODEN FENCING 16

Dallas, TX

Wood Garden f ence 16 and gate in Dallas, TX. The neighborly fence design 16 makes a suitable enclosure for a small existing patio.

Fence style 16 is limited to 60″ height. With the uniform spacing between pickets, any variation from a bowed or cupped picket is readily noticeable.

Shown with Garden Gate Style #32.

Open picket fence 16 in Dallas, TX.

WOOD PATIO FENCING 16

Dallas, TX

Any of our wood fence designs that provide solid panels would, in this application, have reduced the existing patio enclosure with a much greater sense of diminished space.

Two narrow 10″ flanking panels on either side of the gate serve to offset the access.

Courtyard fence panels in Texas.

COURTYARD FENCE 16

Dallas, TX

Now and again we’re sent a ‘before’ photo. What the homeowner’s are accomplishing is a semi-private courtyard no longer openly exposed to the sidewalk and street.

The courtyard fence 16 allows light penetration, as well as visibility.

Patio fence in Texas.

IN-PROGRESS

FENCE 16–PROGRESS

Dallas, TX

Each leading edge is trued on the joiner before the pickets themselves are ripped initially on the bandsaw to prevent bowing. From the bandsaw, they go through the thickness planer to create the final net width, and from the planer to the drum sander for the finished edge sanding. Although this process weeds out 90% of the potentially bowed pickets, the insistence for true and straight pickets is furthered by the use of the Pattern Blocks joined to each picket such that no single picket is left alone and vulnerable to the ravages of solitude.

building a prowell fence #16

16–PROGRESS

The Pattern Blocks are mortised and joined individually to their corresponding pickets. Shown below, the importance of a square layout when clamping to insure the ends of the pickets are even.

Building a prowell fence.

wood fence
The Designs of Prowell Woodworks are protected by Patents and Patents Pending.

abstract separator
Gallery #1 Garden Gates
Gallery #1A Garden Gates
Gallery #1B Garden Gates
Gallery #1C Garden Gates
Gallery #200 Series Garden Gates Plus
Gallery #2 Driveway Gates
Gallery #3 Fences
Gallery #4 Arbors
Gallery #5 Columns
Gallery #6 Benches/Swings
Gates Pricing
Fences Pricing
Driveway Gates Pricing
Columns Pricing

#16 ——0547-Herze
#16-1 —-0741-Winsberg
#16-2—- 0234-Voge
#16-3–1429-Fuery
#16-4— 0234-Voge
#16-5– 1623-Hawthorne
#16-6–1846-Tanoury
#16-7—1856– Ramiza
#16-10–2211-Mitchell

Cropped image: 0690-Cohen