CUSTOM WOOD GATE 82

Wood Gate 82 is Base Price Plus 4%
Go to Base Price Table

Our wood garden gate design 82, with six columns of upper grids. Vertical rectangles. The spacing between the lower pickets is dictated by the upper grids. Shown at 3.53″ net widths.

Marin County

Sent in from Mill Valley, CA. Showing the yard gate 82-2 at the bottom right. In two or three years both the shingles and the gate will have weathered to a gray patina.

Ross, CA (Marin County)

The original wooden garden gate 82, as a compliment to the architecture of the residence. Embellished with 3rd-party decorative bronze hardware.

The decorative hinge-fronts and studs are hammered bronze purchased by the homeowner from the following link:
http://www.craftsmenhardware.com/

Ross, CA

A wood gate design can, and should, mimic the architectural precedence of the house. Particularly when the homeowner himself is an architect.

The flush-joined grid panels visible in the background below the porch were also provided by Prowell.

Walnut Creek, CA

Garden gate design 82-1 flanked by matching panels. Grid width and spacing shown at 4.72″. The vertical ht of each grid is 8.18″

Walnut Creek, CA

An inviting entrance, with the simple entry gate design and flanking panels acting as an open invitation to the exposed courtyard within.

Portola Valley, CA

Gate design 82-3 features the upper grids as squares. As with our gate design #20, fewer grids equals larger grids, and consequently a lowered middle rail.  The grids shown are 4″, matching an adjoining hog-wire fence. (Gate net width 41-½”).
Hopefully we’ll see the installed site photos soon.

Portola Valley, CA 

IN-PROGRESS

Charles burning the signature that appears on all garden gates. Why the stamp? Primarily as an identifiable mark against the legion of knock-offs. As time passes and the copies fall apart, the stamp-less gate confirms that the workmanship is not a confirmed Prowell product.