PONY PANEL 1
Pony Panel 1 is Base Price
> Go to Base Price Table
Maximum 24″ net ht x 72″ width
RonyPanel1 epeating pickets of 1-5/8″ width @ 1-1/2″ spacing.
Associated with Fence Style #1.
PONY PANEL 1
Westchester, CA
Designed as wall-top fence extensions, our Pony Panels are limited to 24″ in net height.
Often, we’re met with a plain stucco wall encompassing the back yard area. The Pony Panels are our Wooden Fence Panels introduced to not only increase the height as a Privacy Fence, but to do so with a friendly and appealing aesthetic. At a maximum 24″ height.
Normally posts are not included, although if preferred we can provide these. 3-1/2″ x 3-1/2″ and anchored to the wall-top using threaded rod bored and epoxied into the bottom of the post and a corresponding holes into the wall-top. Eliminating the unsightly hardware brackets.
PONY PANEL 1
Westchester, CA
A look at this same stretch of wall before the installation. The panels extend the height of fences and walls with a touch of workmanship and design.
PONY PANEL 1
Westchester, CA
With all four sides of this Los Angeles yard wrapped with the wall-top wood fence panels #1, we have elected to include one Panel style #32 per wall section that features our ‘Pattern Blocks’, simply to introduce a little design variation.
WOOD WALL-TOP EXTENSION 1
Westchester, CA
Illustrating how the matching Driveway Gates are off-set to incorporate a Pedestrian Gate, both of which are aligned to the Pony Panel layout along the top of the wall to the left. (Photographed prior to staining)
Showing Driveway Gate style #2-4.
PONY PANEL 1
Westchester, CA
The Pony Panels are installed 1″ off the top of the wall.
FENCE HEIGHT EXTENSION PANEL 1
Westchester, CA
The east wall.
THE RESIDENCE 1
Westchester, CA
Because it’s always interesting to look at houses, we include this, with its front facade brick and stone veneer that defies being categorized. Hansel and Gretal comes to mind.
PONY PANEL 1-1
Price Link: Base Price
Brooklyn, NY
On the left, Pony Panel 1-1 mounted as an extension to our fence panel style #16. A 1″ gap between the two.
On the right, fence style #20.
PONY PANEL 1-1
Brooklyn, NY
PONY PANEL 1-1
Brooklyn, NY
Continuing along this same fence-line we transition down from 6′ height to 5′ height by way of Pony Panel #1-1 with a radius top rail.
PONY PANEL 1-2
Price Link: Base Price
Piedmont, CA (Oakland hills)
Pony Panel 1-2. The height of the panel and springline of the gate Dutch Gates style #116.
PONY PANEL 1-2
Piedmont, CA (Oakland hills)
Decorated for Halloween, the single Pony Panel merging into the angle of the entry steps.
A stack of the panels ready to crate.
PONY PANEL POSTS
3″ x 3″ x 24-1/2″ posts.