WOOD GARDEN GATE 38
Garden Gate 38 is Base Price + 9%
Go to Base Price Table
#38-8
Base Price + 9%
WOOD GARDEN GATE 38-8
A typical cropped example of the Craftsman Wood Gate 38.
#38-6
Base Price + 9%
WOOD GARDEN GATES 38-6
San Diego, CA
A straight forward photo that illustrates the basic pattern of the Arts and Crafts garden gate 38. The pattern varies to accommodate different gate widths. The same basic layout, but for the slight changes when the wider widths requires additional pickets, as illustrated in several examples below.
WOOD GARDEN GATES 38-6
San Diego, CA
We’ll include a ‘before’ photo of the house, simply because it’s charming.
#38
Base Price + 11%
WOOD GARDEN GATE 38
San Anselmo, CA
(With the upper open mortised squares)
Arts and Crafts Garden Gate 38 represents the original of this design, created for a newly renovated Craftsman home belonging to the former, long-time manager of the Grateful Dead.
WOOD GARDEN GATE 38
San Anselmo, CA
Photographed from within the yard some 20 years later.
Shown with Wood Fence Style #2-10
#38-1
Base Price + 9%
WOOD GARDEN GATES 38-1
Santa Rosa, CA
(No open mortised squares)
Wood gate 38-1 as double gates. Because of the wonderful, but irregular stone, the jambs were mounted to the column’s block core. A measurement was provided from the block to the outermost edge of the stone. Prowell created jambs that were 1/2″ thicker, or deeper, than the provided dimension, allowing free swing and preventing the gate from striking or binding on the stone. — Our overall opening is 79″, and at a height of 83″.
Without the open mortised squares along the top rail
WOOD GARDEN GATES 38-1
A closer look at the upper pattern for the Arts and Crafts garden gate 38-1.
WOOD GARDEN GATES 38-1
The G640 Lariat Grips from Rocky Mountain Hardware are 16″ C to C, with back plate escutcheons G684 at 24″ length x 3-1/2″. Available with the backplate, or mounted directly to the gate.
WOOD GARDEN GATES 38-1
The inside face of Garden Gate 38-1 as an example of gates without the usual latches, preferring instead the Rocky Mountain grips upon approach and on the inside. Also shown is the #80-100 Cane Bolt. The 50-400 clasp can be secured with a padlock, when away for the weekend. Not a combination we see too often, simply because it disallows entry from the street, and if you disengage the clasp to allow that entry, the gates have no means of latching to a closed position.
#38-4
Base Price + 12%
WOOD GATES 38-4
San Anselmo, CA
(With open mortised squares in top rail)
We include the wood gate 38-4 simply to illustrate that not all of our Garden Gates are flanked by Prowell’s fence panels nor do they all adorn mega-mansions. A hog-wire fence isn’t normally associated with an aesthetic border, and yet it can work, and in fact does appear to work in this setting.An example of a site photo we’d like to see in another couple of years when the fencing is softened with climbing vines.
#38-3
Base Price + 13%
WOOD GATES 38-3
Santa Barbara, CA
Wood gates 38-3 illustrating a slightly varied grid pattern. Finished by the homeowners with WoodRX Ultra ‘Natural’ with the upper grid and lower pickets, and WoodRX ‘Chestnut’ for the stiles and rails. The overhead arbor is provided by the homeowner.
Rocky Mountain Gate Latch E414.
WOOD GATES 38-3
Santa Barbara, CA
The side wood gate 38-4 illustrates how it is acceptable to couple the open style of the #38 with a clean wire fence construction.
Rocky Mountain Gate Latch E414
ACCOMPANYING DRIVEWAY GATE #20
Santa Barbara, CA
The matching manual Driveway Gate #20
Rocky Mountain Gate Latch E414
#38-5
Base Price + 22%
CUSTOM WOOD GARDEN GATES 38-5
Top arched rail
Upper mortised squares
Bottom rail grid
Arts and Crafts garden gate 38-5 features an augmented grid off the bottom rail and borrows the partial arch of Gate Style #53
CUSTOM WOOD GARDEN GATES 38-5
. . and in doing so has apparently attracted the attention of the local paparazzi.
WOOD GATES 38-7
Berkeley, CA
Wood gate 38-7 in Marin County, CA as a Double-Off-set and flanking panel style #2.
WoodRX pre-finish: ‘Teak’
Double gates utilize the hardware shown below:
Cane Bolt #CB
Gate Stop
Rocky Mountain Gate Latch E414
(The only one of these three you’re required to use is the Gate stop. The latch and cane bolt can be sourced elsewhere, if you prefer.)
See more on Double Off-Set Garden Gates, Click Here
IN-PROGRESS
How do I build this gate?
GATE 38–PROGRESS
The upper pattern is assembled and glued to the top and mid rails, followed by the lower pickets glued to the upper section and bottom rail, followed by the stage shown below.