SUNBURST GATE 107

Sunburst Gate 107 is Base Price + 18%
Go to Base Price Table

The latch on the sunburst garden gate 107 is designed to mount to the orientation of the spokes. Or, with this example as if approaching from the street, on left side of the gate shown.

Oakland, CA

Wooden gate 107-1 in the Oakland hills. Shown with prowell jambs mounted onto the stucco columns.

Shown with leaf strap hinges that were the existing hinges from an earlier gate and not available through Prowell Woodworks.

Oakland, CA

Seen from within the property. The sunburst wood gate is identical on both sides.  The spokes, we’ll mention, are not applied, but full thickness and mortised to the stiles and rails, as well as dadoed–or grooved–to accept the ¾”T panels.

Marin County, CA

Photographed 20 years after installation, the original wooden sunburst gate design 107 from 1995 in Marin County, California as a double gate.

Also note that in 2012 we widened the diagonal spokes from the original. Resulting in a more structurally stable gate.

Oakland, CA

Sunburst garden gate 107-3 stained on site to match the existing fence.
Rocky Mountain latch E504.

IN-PROGRESS
How to build this gate

Ben dry-fitting a gate 107

Charles fitting the plank insert into the dado, or grooves, of the spokes of the sunburst.